4 vga monitor connection – IEI Integration PICOe-945GSE User Manual

Page 106

PICOe-945GSE Half-Size CPU Card

Page 106

Series "A" receptacle connectors are shown in Chapter 3.

Step 2:

Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into

the USB Series "A" receptacle on the external peripheral interface. See

862H825H

Figure

5-20.

Figure 5-20: USB Connector

5.8.4 VGA Monitor Connection

The PICOe-945GSE has a single female DB-15 connector on the external peripheral

interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect

a monitor to the PICOe-945GSE, please follow the instructions below.

Step 1:

Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2:

Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3:

Insert the VGA connector. Once the connectors are properly aligned with the