Asus PCI Express x1 Network Interface PEB-G21 User Manual
Page 35
A S U S P E B - G 2 1 U s e r G u i d e
A S U S P E B - G 2 1 U s e r G u i d e
A S U S P E B - G 2 1 U s e r G u i d e
A S U S P E B - G 2 1 U s e r G u i d e
A S U S P E B - G 2 1 U s e r G u i d e
35
Installing the UNIX Driver Software:
Installing the UNIX Driver Software:
Installing the UNIX Driver Software:
Installing the UNIX Driver Software:
Installing the UNIX Driver Software: SCO OpenServer 5.0.7
SCO OpenServer 5.0.7
SCO OpenServer 5.0.7
SCO OpenServer 5.0.7
SCO OpenServer 5.0.7
O v e r v i e w
O v e r v i e w
O v e r v i e w
O v e r v i e w
O v e r v i e w
This procedure describes the installation of the SCO OpenServer driver. This driver is
released as a media image file containing the driver package. The media image file
can be copied to the target machine directly for installation, or from an installation
diskette that you can create.
Creating a Diskette
Creating a Diskette
Creating a Diskette
Creating a Diskette
Creating a Diskette
1.
Copy the file VOL.000.000 to an SCO system.
2.
Create a diskette using: dd if=VOL.000.000 of=/dev/rfd0135ds18.
Installing the Driver
Installing the Driver
Installing the Driver
Installing the Driver
Installing the Driver
1.
Use custom or scoadmin software to install the SCO OpenServer driver from
the media image or from the floppy created above.
2.
After the package is installed, use netconfig to add the new network adapter.