Yuh Dak SIC-A series - Manual (Page 22)

6-6
2). Parameter instruction
O O SP The lowest setting value (-50 C~+50 C) ;(0~100%)
v
O SP The highest setting value ( SP~+150 C) ;( SP ~100%)
v v
rt1 The lowest turn off time of Rl1. The lowest time interval of
setting turn on and turn offRL1can be adjusted between zero and
ten minutes.
Pf1 The time of probe head malfunction, the working stage of
RL1 On/Off
ADj The compensate value of the input value. Allow range
(-20 +20)
hy1 The range of daily time determines the turning on and
turning off of Rl1,Choose the output mode of +or +controlRL1.
+ is cooling, - is heating.(-25 +25)
After carrying out the setting, turn of the temperature control
instrument. When turn on again, the temperature control instrument
will work according to the new settings.
Note! The parameters of temperature controller is already set before
delivery. Do not reset the parameters except for special reasons.
6. Operation Guide