89 avi hood cleaning – XLT XD-9004E User Manual
Page 89

Technical Support US: 888-443-2751
Technical Support INTL: 316-943-2751
89
AVI HOOD CLEANING
Your AVI hood is constructed of stainless and aluminized steel. Check application restric-
tions on product label prior to usage. Observe recommended precautionary and safety measures as
dictated by the product manufacturer.
Do not use abrasive or caustic cleaners. Abrasive pads will scratch stainless steel surfaces.
Areas with heavy buildup should be sprayed and allowed to soak for up to 5 minutes prior to wip-
ing clean. Always wipe with the “grain” of the surface to maintain appearance.
Shroud Panels can weigh up to 60 lbs [27 kg]. Use caution when lifting.
Schedule provided as a guide only. Frequency of cleaning may vary as needed.
DO NOT spray liquid cleaning agents in the slots & holes of the following loca-
tions:
Hood electrical box (located on back of upper portion)
VFD Controller
Back of control box
Underneath control box
Oven must be cool and the electric cord unplugged before any cleaning is done.
Refer to the Hood Installation Section for disassembly and reassembly.
Cleaning
Wipe down Front, Sides, & Top
□
Clean Light Globes
□
Empty & Clean Grease Trays
□
□
Clean Grease Filters
□
□
Clean Duct and Exhaust Fan
□
□
Inspection
Check Indicator Lamp
□
Check Grease Trays
□
Check Grease Filters
□
Adjust
No Adjustments Necessary
Lubricate
No Lubrication Required
Replace
Light Bulbs
□
Hood Cleaning & Maintenance Schedule
Daily Weekly Monthly
Semi-
Annual
As Required
CAUTION
CAUTION
DANGER