Asante Technologies 3500 - Manual (Page 13)

13
Asanté IntraCore 3500 Series
2 Installation and Setup
This chapter explains how to install and connect the switch to
your network. To configure the switch for management, refer to
the User’s Manual on the CD-ROM.
The following guidelines will help you prepare to install the
switch in such a way that it has the proper power supply and
environment.
2.1 Safety Overview
The following information provides safety guidelines to ensure your
safety and to protect the switch from damage.
Note: Be aware, however, that this information is intended as a
guideline, and may not include every possible hazard to which you
may be exposed. Use caution when installing this switch.
• Only trained and qualified personnel should be allowed to in-
stall or replace this equipment.
• Always use caution when lifting heavy equipment
• Keep the chassis clean
• Keep tools and chassis components off the floor and away from
foot traffic
• Avoid wearing rings or chains (or other jewelry) that could get
caught in the chassis. Metal objects can heat up and cause
serious injury to persons and damage to the equipment. Avoid
wearing loose clothing, i.e. ties or sleeves
When working with electricity, follow these guidelines:
• Before accessing the interior of the chassis, locate
the emergency power-off switch for the room you are in
• Disconnect all external cables before installing or removing a
chassis
• Do not work alone when working with electricity
• Always check that the power has been disconnected from the
circuit