Wade Antenna DMX Bracketed Towers - Manual

DELHI TOWERS
DMX Bracketed Towers
Wade antenna’s ongoing policy of continuing development may result in specification changes to its products
www.wadeantenna.com
Features
“X” brace with beaded channel leg design. •
Enhancements made to both leg profile •
and taper allow for easier installation and
improved tower structure
High strength galvanized steel construction.
•
DMXB-06
DMXB-05
DMXB-04
DMXB-03
DMXB-02
Heat treated aluminum rivets. •
Top sections tapered. •
Universal house bracket. •
No concrete required. •
Load Limits
Designed to support equipment up to 3 square ft. (0.28 m 2 ) projected wind area,
mounted not more than 2.5 sections above house bracket.
Caution: Guy wires must be used for larger loads or greater
heights above house bracket.
Tower Packages
DMXB tower packages come complete with tower sections, DM mast, top plate,
rotor plate, BP2S base plate, TMCA mast clamp assembly and DMXHB universal
house bracket. Height includes mast.
DMXB-02 20’ (6.10 m)
DMXB-03 28’ (8.54 m)
DMXB-04 36’ (10.97 m)
DMXB-05 44’ (13.41 m)
DMXB-06 52’ (15.85 m)
Accessories
GS123 Guy station
DMBS Galvanized steel drive stakes. Set of three.
1 1/4” (3.2 cm) x 3’ (0.91 m). 7.3 lbs. (3.31 kg)
BP2S Base plate
Note: For tower accessories or parts that may be ordered separately, please
refer to the DMS Parts and Accessories Page.
DMX-02S
DMX-02S
DMX-02S
DMX-02S
DMX-02
DMX-01T
DM MAST
DMBS
DMX-01T
BP2S
DMXHB
26”
(66.04 cm)