Airlink101 AWMB100 - Manual (Page 40)

38
IP Address, Subnet
Mask, Default
Gateway These fields can only be modified when DHCP
Client mode is disabled. If you are connecting
to an existing network and are unsure what to
enter here, ask the person that set up your
network to provide these values for you.
DHCP DHCP can be used to automatically configure
your network addresses. Select Disable,
Client or Server from the pull-down menu.
Disable: Don’t use DHCP
Client: Automatically obtain a network
address. You must have a DHCP server on
the network for this to work.
Server: The AirLink101 Music Bridge will act
as a DHCP server, providing network
addresses to other devices on the network.
DHCP Client
Range Select the range of network addresses to
be allocated.
Show Client Click to show the current DHCP Client
table.
DNS Server Enter the IP address of the machine to
handle your Domain Name Service
requests.
802.1d
Spanning
Tree
Enabling an 802.1d Spanning Tree will prevent
the network from creating infinite loops. Infinite
loops can happen in the network when WDS is
enabled and there are multiple active paths
between stations.
Clone MAC
Address You can specify the MAC address of your
Access Point, replacing the factory setting.
Apply Change Click this button to save your changes.
Reset Click this button to discard your changes.
5.5 Other Settings
5.5.1 System Log
This page displays a list of recent events on the network. A network administrator can
use the system log to trace problems.