Airlink101 AWMB100 - Manual (Page 36)

34
Authentication to have a RADIUS server issue the WEP key dynamically. For most
home users, you will have to enter the WEP key manually on each device that joins the
network
Set WEP key ƒ
Clicking the Set WEP Keys button
will prompt you with a new window.
Here, select a 128-bit key for higher
security.
ƒ
Select HEX if you are using
hexadecimal numbers (0-9, or A-F).
Select ASCII if you are using ASCII
characters (case-sensitive).
ƒ
Ten hexadecimal digits or five ASCII
characters are needed if 64-bit
WEP is used; 26 hexadecimal digits
or 13 ASCII characters are needed if
128-bit WEP is used.
Encryption: WPA/WPA2
WPA/WPA2: If WPA is selected, users will have to choose between two modes of
authentication: Enterprise (RADIUS) and Personal (Pre-shared Key). Home users will
want to use Personal.