Vanguard CBPS-300 - Manual (Page 7)

CBPS-300 OPERATING INSTRUCTIONS
5
2.0 CBPS-300 SPECIFICATIONS
Table 1.0 CBPS-300 SPECIFICATIONS
TYPE Special-purpose test equipment, Variable DC Power Supply
SIZE (inches) 16.8” wide by 12.6” high by 12”deep (42.6cm x 32 cm x 27cm)
WEIGHT 60 pounds (27 Kg)
INPUT POWER 120 Vac or 240Vac selectable, 50/60Hz
DISPLAY 2 line by 16 character back-lighted LCD
VOLT METER DISPLAY 0-300VDC, ±1 V
OUTPUT VOLTAGE 12 to 250 Vdc
COIL DC POWER SUPPLY
DC OUTPUT CURRENT REGULATION
24 Vdc 10A <6%
48 Vdc 10A <3%
120 Vdc 6A <2%
250 Vdc 3A <2%
CHARGING MOTOR DC POWER SUPPLY
NO LOAD VLTG LOAD CURRENT LOAD INTERVAL FULL LOAD VLTG
48 Vdc 12A 60 S 40 Vdc
48 Vdc 18A 20 S 30 Vdc
120 Vdc 12A 60 S 90 Vdc
120 Vdc 18A 20 S 70 Vdc
240 Vdc 6A 60 S 200 Vdc
240 Vdc 9A 20 S 185 Vdc
OUTPUT PROTECTION All DC outputs are over-current protected
ENVIRONMENT Operating: -10°C to 55°C; Storage: -40°C to 65°C
WARRANTY One-year parts & labor (post warranty service is available)
NOTE:
THE ABOVE SPECIFICATIONS ARE VALID AT NOMINAL OPERATING VOLTAGE AND AT A TEMPERATURE OF 25
° C (77 ° F)
CBPS-300  SPECIFICATIONS MAY BE UPGRADED AND CHANGED WITHOUT PRIOR NOTICE.