Vanguard TTRA (ATRT-01, ATRT-03, ATRT-03A, and ATRT-03B) - Manual (Page 20)

TTRA VERSION 12.x SOFTWARE MANUAL REV 5
17
4.4 Copying Test Records
To copy a test record from one location on the PC hard drive to another location:
1. From the File-Util menu, click on Copy and then select Test (alternatively you can click
on the File menu, click on File Utilities, click on Copy and then select Test). The following
window will be displayed:
2. If the test record you would like to copy is not in the current directory, click on the
“Path:” button at the top of the window and browse to the directory containing the file.
Once you have located the test record to be copied, click on the filename. You may
select additional test records by holding down the [CTRL] key and clicking on each
subsequent filename. Once you have selected the test record(s) to be copied, click on
the “OK” button. The following window will be displayed:
3. Browse to the folder where you would like the test record to be copied to, and then
click on the “OK” button. The test record will be copied to this folder with the same
filename as the original.