Tyrex D600-AC - Manual (Page 16)

ESPECIFICACIONES
TECNICAS
TECHNICAL
SPECIFICATIONS
D600-AC
SPÉCIFICATIONS
TECHNIQUES
D600-AC D600-AC
Voltage 120V
Current 5.2 amps
Frequency 60Hz
TPM 3300
Poids (kg) 3.6
Hauteur
(mm)
175
Longueur (mm)
800-1054mm
Larguer 102mm
Capacité 50 vis
fixarions (une bande)
Longueurs 32 - 75mm
des de longueur
fixations corps fileté
#6 - #9
Voltaje 120V
Current 5.2 amps
Frequency 60Hz
RPM 3300
Peso (kg) 3.6
Alto (mm) 175
Largo (mm) 800-1054mm
Profundidad 102mm
Capacidad 50 tornillos
para tornillos (una faja)
Gama de largos de 32 a75mm
tornillos (1a 2 pulg) cuerpo
de rosca #6 a#9
Voltage 120V
Current 5.2 amps
Frequency 60Hz
RPM 3300
Weight 8 lbs.
Height 6 7/8 ”
Length 31 1/2 ”-41 1/2 ”
Width 4”
Fastener 50 screws
Capacity (one strip)
Fastener 1 1/4 -3”
Range #6 thru #9
thd.
TyRex TOOL & PARTS WARRANTY
This tool has been designed and constructed using
the highest standards of material and workmanship.
TOOL AND PARTS WARRANTY:
The length of this guarantee is one year from date of purchase by the original retail purchaser. During this period,
Rex Commercial Tools and Fasteners, LLC, will repair or replace at Rex’s option, any original part or parts for the original retail
purchaser. This will be done free of charge, provided the parts are determined defective in materials or workmanship upon
examination by a TyRex Authorized Warranty Service Center (exception: power cords and bits). Any replacement part provided
will carry a warranty for the balance of the period of warranty applicable to the part it replaces.
This warranty will be honored, only if:
A) No evidence of abuse, or failure to follow recommended operational maintenance, or modification of the tool is present
(read
Operator Manual for use and maintenance instructions);
B) When repair or replacement of parts or tools is necessary, the original retail purchaser returns the complete tool or part, with
transportation prepaid, to the nearest TyRex Authorized Warranty Service Center, with purchase receipt or other positive
proof that the part or tool is within the warranty period.
THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN,
EXPRESS, OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE EXCLUDED. BUYER’S OR USER’S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. REX
COMMERCIAL TOOLS AND FASTENERS, LLC. SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR
SPECIAL DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLI-
GENCE) OR OTHERWISE, SHALL REX’S LIABILITY EXCEED THE PRICE OF THE TOOL WHICH HAS GIVEN RISE TO THE CLAIM
OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS TOOL SHALL TERMINATE UPON THE EXPIRATION OF THE WAR-
RANTY PERIOD SPECIFIED ABOVE.
Replacement of Tool Due to Natural Disaster
Rex will also replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only
from the forces of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted
a completed warranty registration card, and then submits proof of ownership and an acceptable statement describing such Act
of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for
filing a claim call 1-800-396-3318.
Rex Commercial Tools and Fasteners, LLC
CINCINNATI, OHIO 45245-1213 USA