Performing a basic setup, Basic setup – Actiontec electronic GT701A User Manual

Page 34

Performing a
Basic Setup

This chapter is a guide through a basic configuration setup of the Modem for users
who did NOT use the Actiontec Installation Buddy® to set up the Modem. The
basic setup includes instructions on how to connect the Modem to the

ISP

and

change the user name and password.
To complete a basic setup, the user will need information provided by the

ISP

and

access the Modem’s Web Configurator. This information from the

ISP

is sometimes

contained in a welcome letter or

ISP

worksheet. If this document is not available,

contact the

ISP

immediately and request one.

Basic Setup

☞

Note: If you already set up the Modem using the Installation
Buddy (as described in Chapter 2, “Setting Up the Modem”), the
settings described in this section have already been configured.
Please continue to chapter 4, “Using Advanced Setup,” to configure
the advanced settings of the Modem.

1. Open a Web browser. In the “Address” text box, type

http://192.168.0.1

then press Enter on the keyboard.

2. The Web Configurator’s “Main Menu” screen appears. Select Setup/

Configuration.