Teledyne LeCroy Spectrum Analyzer - Manual (Page 7)

Instruction Manual
921324 Rev A 5
Show Peaks
This procedure explains how to use the Show Peaks feature. Show Peaks marks a desired
number of peak amplitudes in the spectrum trace and displays their values in tabular form.
Show Peaks is an automatic and continuous identification of peaks. As the range of frequencies
measured changes, peak values are recalculated and markers are moved. The values tabulated
are always absolute values for the marked peak.
1. Set up the spectrum trace .
2. Touch the Peaks/Markers tab; the Peaks/Markers dialog opens.
3. Select Peaks.
4. Enter a Max. (number of) Peaks up to 100.