Teledyne LeCroy QPHY-PCIe - Manual (Page 7)

QPHY-PCIE Operator’s Manual
The compliance base board (CBB1) provides probing access for 1, 4, 8 and 16 lane connectors
that connect to Gen 1.1 add-in cards. This is used for testing add-in cards that only perform at
2.5GT/s.
Figure 2 . Compliance Base Board for 1, 4, 8 and 16 lane connectors (CBB1).
The compliance load board (x1/x16 CLB2) provides probing access for 1 and 16 lane
connectors that connect to Gen 2.0 system boards.
Figure 3 . Compliance Load Board for 1 and 16 lane connectors (x1/x16 CLB2).
922543 Rev Error! Reference source not found. 3