Teledyne LeCroy CANbus TD - Quick Reference Guide - Manual (Page 7)

6
Helpful Hints
Characterize
System
Performance
You can use many
different built-in
oscilloscope tools, such as cursors, measurement
parameters, statistics and histicons to understand
performance of your embedded controller board.
Depending on other options installed in your
oscilloscope, you may also be able to Histogram and
Trend measurement parameters. Reference your
Operator’s Manual for more detailed information.
Sequence Mode
Helps Capture
Infrequent Events
Sequence Mode is a powerful
feature that allows you to
trigger and capture CAN Bus
or other events and save them
to acquisition memory with
minimal dead time (< 6 us)
between triggers. This can be
helpful for capturing sensor
data, error frame conditions
or any event where distinct
events are spaced very close
together (spacing is less than
oscilloscope re-arm time), or
very far apart (minutes, hours
or days).