Teledyne LeCroy UWBTracer Automation Manual - Manual (Page 26)

LeCroy UWBTracer Automation API Reference Manual Manual Version 3.02
22
3.2.2 IUwbAnalyzer2::StopGeneration
HRESULT StopGeneration ();
Stops generation started by the StartGeneration method.
Parameters
None
Return values
ANALYZERCOMERROR_ANALYZERNOTCONNECTED Analyzer is not connected
ANALYZERCOMERROR_WRONGCALL
Analyzer is not running
Remarks
Stops the generation started by the StartGeneration method. The generation stops if the analyzer is
either running or paused, and the analyzer then returns to the idle state.
Example
Wsh:
Set Analyzer = WScript.CreateObject("CATC.UWBAnalyzer", "Analyzer_")
'Tell the CATC UWB analyzer to start generation.
Analyzer.StartGeneration "example.uwbg"
WScript.Sleep 3000
'Tell the analyzer to stop recording.
Analyzer.StopGeneration()
VBScript:
RUNAT=Server
ID = Analyzer
CLASSID = "clsid:EE43DE29-65CA-4904-B111-32919E00D061" >
<br> <br>
RUNAT=Server
ID = Analyzer
CLASSID = "clsid:EE43DE29-65CA-4904-B111-32919E00D061"
>