Teledyne LeCroy Hot Swapping PCI Cards - Manual (Page 11)

7
Production Automation
PCI Test I/F Package
•
Hot Swap up to 2 UUT boards on an enclosed system
•
Low cost, easy to replace Connectors
•
Designed to be used with the PCIBX series extenders.
•
May be used in test environments where it is not desirable to leave the PC Chassis open.
•
LEDs provide visual indication of UUT power.
•
Easy automation of the power up and power down cycles, through software control.
•
Minimizes the extender board connector wear-out.
•
This fixture is designed for a 6" high PC Chassis, the user must cut a hole in the top cover of the chassis. This fixture
will connect to the installed PCIBX64-5/PCIBX64-3 extenders, via a provided adapter PCIMM. After the fixture is
installed the PC cover may be installed again.