Test platform – Teledyne LeCroy PCI Express Test Platform 16x2.5GT-s_16x5.0GT-s_16x8.0GT-s Quick Start User Manual

Page 2

AC Power Connector: Operates at 100-240 V, 50-60 Hz, 500 W.
Power Switch: On/Off switch.
DUT PCIe x16 Connector: Supplies 3.3 V up to 3 A and 12 V up
to 5.5 A.
Summit Z3-16 Exerciser Power Connector: 2-pin DC power
connector to provide power for Summit Z3
Reference Clock In Connector: Connects external reference
clock source, selectable by an external clock selection switch.
Clock is delivered to both PCIe slots.
Reference Clock Out Connector: Provides external reference
clock output.
Summit Z3-16 Slot Connector: Powered by Test Platform. Can
be used with other equipment.
DUT Slot Connector: The DUT Power switch controls power to
this slot and to auxiliary power.
DUT Power Connector: 6-pin power connector supplies 12 V up
to 6.25 A for graphics cards (cable provided). 8-pin power
connector supplies 12 V up to 12.5 A for graphics cards (cable
provided).
Output Connectors: 2 output iPass connectors for use with
Protocol Analyzer

To Analyzer (15:8) Connector: Connects to Summit T3-16
Analyzer (lanes 15:8). This is an optional connection for users
adding a Summit T3-16 Analyzer to their setup.
To Analyzer (7:0) Connector: Connects to Summit T3-16
Analyzer (lanes 7:0). This is an optional connection for users
adding a Summit T3-16 Analyzer to their setup.
DUT PRSN LEDs: 4 LEDs indicate whether x1, x4, x8, or x16
signals are present.
Power Monitor LEDs: 2 LEDs monitor power to lower PCIe slot:
3.3 V or 12 V.
Auxiliary DUT Power LEDs: 2 LEDs monitor power to the DUT:
3.3 V or 12 V.
System Power On/Off Switch: Powers the PCIe Gen1/2/3 Test
Platform on or off.
SSC Switch: When using the internal reference clock, turns
Spread Spectrum Clocking (SSC) on or off. If using external
reference clock, switch has no effect.
Reference Clock Switch: Selects the internal or external clock.
Clock is delivered to both PCIe slots.
DUT Power Switch: Switches both auxiliary and slot DUT power
on or off.
Reset Bus Button: Emulates PE reset.

Test Platform

Trademarks and Servicemarks

Teledyne LeCroy, Summit Z3-16 and Summit T3-16 are

trademarks of Teledyne LeCroy.

All other trademarks are property of their respective companies.

Changes

Product specifications are subject to change without notice.

Teledyne LeCroy reserves the right to revise the information in this

document without notice or penalty.

Teledyne LeCroy Customer Support

Online Download

Periodically check the Teledyne LeCroy Protocol Solutions Group

web site for software updates and other support related to this

product. Software updates are available to users with a current

Maintenance Agreement.

Mail:

3385 Scott Blvd., Santa Clara, CA 95054-3115

Web: teledynelecroy.com/Support/SoftwareDownload/

E-mail: [email protected]

Tel:

(800) 909-7112 (USA and Canada)

Tel:

(408) 653-1260 (worldwide)

Part Number: 923055-00 Rev A

This document may be printed and reproduced without additional permission, but all copies should contain this copyright notice.