Teledyne LeCroy BPT - References Manual - Manual (Page 43)

39
CATC S CRIPTING L ANGUAGE 1.1 C HAPTER 11
Reference Manual BPT Primitives
Inquiry()
Inquiry( IAC, Timeout )
Return value
• Array of Bluetooth addresses that were found during the inquiry.
• “Failure”
• “Inquiry in progress”
Comments
Calling Inquiry() will block for the duration specified by Timeout . The
function returns an array of devices that were found during the inquiry. These can
be addressed individually. The current version of BPT hardware only supports
GIAC inquiries.
Example
# Use default parameters
Devices = Inquiry( );
Trace( "First device was: ", Devices[ 0 ] );
WaitForConnect()
WaitForConnect( Address, TimeoutMS )
Return value
• “Success”
Parameter Meaning Default Value Comments
IAC Inquiry
Access Code
GIAC “GIAC”, or a 32-bit integer value
Timeout Timeout in
units of 1.2
seconds
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device to wait
for connec-
tion with
TimeoutMS Timeout in
milliseconds
10000
(10 seconds)