Apple Mac Pro (Processor Cage Fans, Front and Rear Replacement) - Manual (Page 5)

073-1254 Rev. A 5 © 2009 Apple Inc. All rights reserved.
8
Holding card by top
corners, pull it up out
of slot.
Remove card from
9
computer.
Checklist for handling card:
When removing or installing card, handle it only by the edges. Do not touch its connectors •
or any components.
Don’t rock card from side to side; instead, lift card straight up from connecotr to remove it,
•
and press card straight into slot to install it.
Don’t force card. If you meet a lot of resistance, pull card out. Check connector and slot for
•
damage or obstructions, then try inserting card again.
Pull card gently to see if it is properly connected. If it resists and stays in place and its gold
•
connectors are barely visible, card is connected.