Apple Mac Pro (Processor Cage Fans, Front and Rear Replacement) - Manual (Page 13)

073-1254 Rev. A 13 © 2009 Apple Inc. All rights reserved.
Processor Cage
Important: Before you re-
install cage into enclosure,
fans must be inserted
partway into cage.
5
Position cage in
enclosure.
Slide front and rear
6
fans into place, so
that they engage with
latches.
Replace and tighten
7
5 mushroom-head
screws.
Secure
8
6 captive
screws.
Reconnect
9
3 cables.
PCIe Fan
10
Slide fan into
enclosure so that fan
tabs engage with
slots on metal cage.
Press down until fan
11
clicks into place in
connector.
Replace
12
2 screws.