Apple Mac Pro (Processor Cage Fans, Front and Rear Replacement) - Manual (Page 2)

073-1254 Rev. A 2 © 2009 Apple Inc. All rights reserved.
Required Tools
Phillips #2 screwdriver •
RIght-angle, 2.5 mm •
hex driver
Flatblade screwdriver
•
Long-handled Phillips •
#1 screwdriver
Removing the
Installed Fans
Fans are installed in
processor cage. To access
fans, you must first
remove:
Hard drive in far-left •
drive bay
Graphics card in slot 1
•
Processor tray •
PCIe fan •
Processor cage •
Hard Drive
1
Make sure latch on
back panel is up, so
that drive is unlocked.
Pull hard drive out of
2
far-left drive bay.