En en, Get to know your device, Prior to startup – Teka NFE2 400 User Manual
Page 9: Setting the operating temperature

 
 
 
 
 
 
 
3
Get to know your device 
 
Waring
Below information about accessories are 
supplied just for reference. Below accessories 
may not be exactly same as the accessories 
of your appliance. 
Fig. 1 
A) Fridge compartment 
B) Freezer compartment 
 1. Control panel 
 2. Interior light 
3. Movabale shelves
 4. Wine rack 
 5. Thermostat knob 
 6. Crisper cover 
 7. Salad crisper 
 8. Ice bank 
 9. Freezer compartment 
10. Adjustable front feet 
11. Adjustable door shelves 
12. Egg tray 
13. Door shelf 
Prior to startup
Before you begin operating your device, 
the following points should be re-checked for 
safety: 
• Is the device standing properly on the floor? 
• Is there sufficient space for good air 
circulation? 
• Is the interior clean? (Also see the section 
“Cleaning and care”) 
• Now connect the appliance to the mains.
The compressor is turned on; the interior light 
comes on when the Fridge door is opened.
Do not place foodstuff into the refrigerator until 
the temperature has reached the desired level.
Setting the operating temperature
Freezer Compartment Temperature can be 
adjused by the electronic display (Fig 2) 
The temperature of the fridge compartment 
depends on coming amount of air from the 
freezer compartment. 
You make the temperature adjustment of the 
fresh food compartment by adjusting the knob 
between 1 and 5 positions which is placed on 
the back wall of the fridge compartment (Fig 6) 
 
1 = Lowest cooling setting(Warmest setting) 
2 = Highest cooling setting(Coldest setting ) 
 
Control Panel 
 
Control Functions 
Considering Figure 2, the following functions 
are implemented on the appliance.
a) Focus-Cool 
b) Freezer Set 
c) Eco-Fuzzy 
d) Quick Freeze 
e) Actual Fridge Temperature 
 f) Actual Freezer Temperature 
g)  Freezer Bar Graphs 
h) Focus-Cool Icon 
 i) Economy Icon 
 j) Eco Fuzzy Icon 
 k) Quick Freeze Icon 
 l) Alarm Icon 
en en
