Alcatel-Lucent 6850 - Manual (Page 68)

Open Problem Reports and Feature Exceptions
page 68 OmniSwitch 6800/6850/9000—Release 6.1.3.R01
PR 106213
When using "configuration apply" to apply routing configuration to an OS6850 system that has completed
its boot up, parts of the configuration may fail with a "system busy" error.
Workaround: 1) Ensure that the protocol is manually loaded prior to applying the configuration file. For
example,
> ipv6 load ospf
> configuration apply ospf3.asc.1
2) (Optional) After configuring the protocol, use a "write memory" to commit the changes to the boot up
configuration file.
Server Load Balancing (SLB)
Problem Reports
PR 105700
For SLB clusters on OS9000, there are no statistics or flow distribution metrics on a server basis. The only
server statistic is the number of packets passed to a cluster.
Workaround: There is no known workaround at this time.
PR 107490
When executing a “show ip slb cluster ” CLI command on a non-existing SLB cluster name
more than 23 characters long, an “slbCtrl” STR is generated. However, no adverse conditions are seen
with the switch.
Workaround: There is no known workaround at this time.
UDP Relay
Problem Reports
PR 97666
TCP does not send an RST after receiving an unacceptable ACK in SYN-RCVD state on OS6800 and
OS6850.
Workaround: There is no known workaround at this time.