Superwinch C1000 (Motor Cover/Remote) - 453 kgs/12V User Manual

Page 3

The C1000 electric winch is for intermittent duty only. Motor cool-down time
is required. Can be mounted horizontally or vertically. Winch can be
utilized in a variety of lifting operations involving machinery, trucks, boats,
farm implements, etc. Equipped with DC motor, permanently lubricated/sealed
gear box, switch with harness assembly, handsaver, and pulley block.

For additional information, consult Specifications and Performance.

D E S C R I P T I O N

U N P A C K I N G

Electric Motor - 1.3 peak hp (0.9
kW) 12 Volt Permanent Magnet.

Gear Ratio . . . . . . . . . . . . . . . 159:1

Braking - A wrap spring brake will
support the load when power to
the motor stops.

Remote Switch - 12’ (3.66m) Hand
held pendant switch assembly with
interlocking reverse switch and trigger.

Working Load* . 1,000 lbs (454 kg)

Safety Factor . . . . . . . . . . . . . . 5:1

(*) Based on first layer performance.

S P E C I F I C A T I O N S

This equipment must be used as recommended by the

manufacturer. Failure to follow these recommendations

could endanger your life and/or cause property damage.

Please unpack carefully and read the instructions before beginning. Inspect
carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts.