Acer 2500 - Manual (Page 46)

37 Chapter 2
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Options
Hyper-Threading
Technology The function is supported only when the CPU
installed is 3.06G or above. The system will
automatically hide this selection when detecting the
CPU frequency is below 3.06G or the CPU does not
support Hyper-Threading Technoloty. Enabled /Disabled
Infrared Port Enables, disables or auto detects the infrared port. Disabled /Disabled/Auto
Parallel Port Enables, disables or auto detects the parallel port. Enabled /Disabled/Auto
Mode Sets the operation mode of the parallel port. ECP , EPP, Output only or Bi-
directional
Base I/O address Sets the I/O address of the parallel port. 378 /278
Interrupt Sets the interrupt request of the parallel port. IRQ7 /IRQ5
DMA channel Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP. DMA3 /DMA1