Reset, Exit – Staub Electronics WPS-700-BUL-A WIREPATH - TRUE DAY_NIGHT OUTDOOR VARIFOCAL BULLET CAMERA (600 TVL, D-WDR) User Manual

Page 21

WPS-500-BUL-A Installation Manual

ID POS
Select the position for the CAMERA ID on the display screen by using

the left and right arrows “”, “” to move the ID.

LANGUAGE Setting
There are 2 language options: English and Chinese.

VERSION

Displays the factory firmware version.

RESET

If adjustment to the camera’s settings results

in poor picture quality, it is recommended

to restore the camera to factory default

settings. All configurations with the exception

of the COMM SETTINGS can be reset back

to factory default settings by selecting

FACTORY RESET and pressing the MENU

button. This option does not have an

"UNDO" feature, so ensure default settings

are desired before selecting this function.

EXIT

A. Select EXIT to exit the OSD menu.
B. Carefully place the Silica pack removed in step 5 B into the

camera housing. If the pack's blue crystals have turned pink

this indicates the pack has absorbed moisture and must be

replaced.

C. Replace the lens cap and tighten for a weatherproof seal. Install

the sun shade to block direct sunlight on the lens.

RESET

FACTORY RESET
RETURN RET