Southern Folger LOCK MOUNTINGS - Manual (Page 2)

P.O. BOX 2021 • SAN ANTONIO, TX • 78297 • 210-533-1231 • FAX: 210-533-2211 Revised 3/09
APPLICATION:
Many of our locks are equipped
with a “mogul-type” cylinder. This
rugged cylinder is approximately
twice the size of a standard
“builder’s hardware” cylinder.
The mogul cylinder has six-pins
with side bar operation. Six
tumbler cylinders provide higher
security than standard five
tumbler cylinder with more
combinations available. All
cylinders may operate under the
same exclusive key, including
Southern Steel security builders
cylinder, if desired.
NOTE: Master keying available.
TECHNICAL DATA:
• STANDARD FINISH: US26D
• MOGUL CYLINDERS:
Brass
• MOGUL KEYS: Nickel silver
• CYLINDER SIZE: 2” thread
Diameter
• CYLINDER WEIGHT: 1.5 lbs.
• KEY SIZE: 2-3/8” L x 1/8” TK
• TENSILE STRENGTH:
91,000 lbs/in.2
• YIELD STRENGTH:
76,000 lbs/in.2
• ROCKWELL HARDNESS:
89 HRB
• PIN TUMBLERS:
Combination nickel silver
and stainless steel,
6 tumblers per lock
HIGH SECURITY SIX-PIN
MOGUL CYLINDER
MOGUL KEY
F2
A C C E S S O R I E S
MOGUL CYLINDER
AND KEY
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 92