Thread depth indicator, Lewtud & lewctud series – Luxor|H.Wilson LE27WTUD User Manual
Page 11
LEWTUD & LEWCTUD Series
®
11
Thread Depth Indicator
Marking the depth
Thread depth
Indicator
Thread insert
Inverted flat panel
display
Screw
Marking
Thread depth
indicator
Screw
Thread depth
indicator
Marking
1.
Insert the thread depth indicator through the thread inserts found on the back of the flat panel display to
make sure the inserts measure the same full depth and mark it with a pencil (see below).
2.
Locate the correct diameter screw for the thread insert from the display connection hardware bag. Compare
your markings to the screws (supplied).
3.
If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw.
4.
The screw length must not bypass the marking. Select another screw size, until you find one that comes closest
to your mark without going past.
- 51911 (1 page)
- 51925 (1 page)
- ATC332 (2 pages)
- AV42 (2 pages)
- AVJ42XLC (2 pages)
- AVJ42XLC-LCD (4 pages)
- AVJ422KB4 (2 pages)
- AVJ42DL (3 pages)
- AVJ42CDL-LCD (5 pages)
- AVJ42KBC (3 pages)
- AVJ42KBDL (4 pages)
- AVJ42XLKB (3 pages)
- AVJ42XLKBC (3 pages)
- AVJDL (1 page)
- FP2000 (12 pages)
- HE42 (1 page)
- HEW385C (1 page)
- HL15 (1 page)
- JCB30-B (1 page)
- JCB40-B (1 page)
- L100S3 (1 page)
- L220 (1 page)
- L270 (1 page)
- LAMC2936 (1 page)
- LAMC3037 (1 page)
- LP16 (2 pages)
- LE26C (3 pages)
- LE27 (2 pages)
- LE27C (3 pages)
- LE27CWTUD (16 pages)
- LE27WT (3 pages)
- LE42 (2 pages)
- LP54E (2 pages)
- LE54C (3 pages)
- LE40CWTUD (16 pages)
- LE40WT (3 pages)
- LE40WTUD (16 pages)
- LE42C (3 pages)
- LE48CWTUD (16 pages)
- LE48WTUD (16 pages)
- LE54WT (3 pages)
- LELDUO (2 pages)
- LEDUOC (3 pages)
- LEF34 (1 page)