Luxor|H.Wilson AVJ42XLKBC User Manual
H x1
www.luxorfurn.com
www.hwilson.com
01/31/13
Parts List
Tools Required
Take the top shelf of your metal cart
and lay it flat. Collect parts: F, A, B &
C. Push Screw A through the hole at
the top of the shelf. Lay bracket F and
washer B on top of screw A. Take nut C
and fasten with a screwdriver and pliers.
Collect parts: G & D. Align the pullout
shelf runner G so that the threaded
screw holes match up with the holes on
bracket F. Make sure the runner slides
toward the front of the cart. Take screw
D and fasten through bracket F into the
threaded screw holes of runner G.
Collect parts: H & E. Slide out runner G
so that it is fully extended. Align pullout
shelf H and runner G so that the screw
holes meet. Take screw E and fasten it
through runner G into the screw holes
of pullout shelf H. The pullout shelf
assembly is now complete.
1
2
3
- Phillips Screwdriver
- Pliers or Adjustable Wrench
H x1
A
(Back)
(Front)
(Back)
(Front)
(Back)
(Front)
D
G
H
E
F
B
C
Pullout Shelf
Instructions
AVJ42KB, W42AKB
G x2
A x4
B x4
C x4
D x4
E x4
F x4