LevelOne WPS-1133 - Manual (Page 33)

33
http://server.domain:port/
Follow the instructions on the appropriate home page to configure or modify your printer.
Note: You can also substitute the server domain with TCP/IP address.
Removing HP Web JetAdmin Utility
To remove HP Web JetAdmin software from your web server, use the uninstall program
provided with the software package.
5. Configuration from Embedded Web Server
Overview
The Print Server contains an embedded web server that can be accessed through a
supported web browser on a LAN, for example, Microsoft Internet Explorer 5.01 or higher,
Mozilla Firefox, Netscape 7.2 or higher, etc.
The embedded web server provides access to configuration and management pages for the
print server and the connected peripheral device.
Using Embedded Web Server
Before you can use the embedded web server, the print server must be configured with an
proper IP address. There are many ways to configure the print server’s IP address. For
example, the Windows-based of PSAdmin utility can easily set an IP address with the print
server, please refer to the TCP/IP options of Manual Setup on chapter 3.
After an IP address is established on the print server, perform the following step:
Status Menu
Once you have finished the IP address configuration with print server. You should be use
web browser to view and management the print server. The status menu of the print server
helps administrator control the print server’s System, Printer, Wireless, NetWare, TCP/IP,
AppleTalk, SNMP and SMB status.
Preparation