Using psadmin, Sing, Dmin – LevelOne WPS-1133 User Manual

Page 21

Text mode
Original mode

Using PSAdmin

After the software of setup CD is successfully installed, starts PSAdmin utility from your
Windows Start menu: start -> All Programs -> Network Print Server -> PSAdmin. The
screen will then appear as follow picture.

All print server(s) on the LAN will be displayed along with their respective device name, MAC
Address, print server name, firmware version, and status. The terms are defined as follows:

Device Name: The name of the print server hardware used for identification purposes.

Note:
If you wish to install more print servers, start setup wizard from your Windows Start menu: start -> All
Programs -> Network Print Server -> PSWzard and repeat the installation procedure.