LevelOne WAP-6150 User Manual
Page 33
33
“authPriv” for both authentication and private key required.
8. Username 1/2: Use this field to identify the user name for the specified level of
access.
9. Password 1/2: Use this field to set the password for the specified level of
access.
10. User 1/2 Priv Key: Use this field to define the encryption key for the specified
level of access.
11. Trap Event Receiver 1 ~ 4: Enter the IP addresses or Domain Name of your
SNMP Management PCs. You have to specify the IP address, so that the device
can send SNMP Trap message to the management PCs consequently.