LevelOne WAP-6101 - Manual (Page 35)

WPA-6101 300Mbps Wireless Ceiling Gigabit PoE Access Point
This device can also export system logs to specific destination by means of syslog
(UDP) and SMTP(TCP). With enabled Syslog function, this device will send log to a
certain host periodically. You need to install a syslog utility on a host to receive
syslogs
The items you have to setup include:
1. IP Address for syslogd: Host IP of destination where syslog will be sent to.
Check Enable to enable this function.
3.3.2.3 Email Alert
This device can also export system logs via sending emails to specific recipients. The
items you have to setup include:
1. Setting of Email alert: Check if you want to enable Email alert (send syslog via
email).
2. SMTP Server: Port: Input the SMTP server IP and port, which are connected
with ':'. If you do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".