LevelOne GES-1650 - Manual (Page 90)

Web Smart Switch
90
The following table describes the labels in this screen.
LABEL DESCRIPTION
Upgrade
Method
Select upgrade method:
 TFTP: Use TFTP to upgrade.
 HTTP: Use HTTP to upgrade.
Server IP
IP address of the TFTP server. If the TFTP upgrade method is selected, the
IP address of the TFTP server must be assigned.
File Name
Firmware image or configuration file name on remote TFTP server. If the
TFTP upgrade method is selected, the file name must be specified.
Browse File
If the HTTP upgrade method is selected, the browse file field allow you to
select any file on host operating system.
Upgrade
Type
Select upgrade type:
 Image: Firmware image of current system.
 Configuration: Configuration file.
Upgrade
Click Upgrade to update the file specified above and install the new
firmware.
3.9.3 Configuration Manager
This page allow user to save running configurations to any file which user specified by pushing the
“Save Configuration” button. And use “Set Startup” button to select any existing configuration file
as startup configuration. The “Delete” button allow user to delete the selected configuration file.
Click Maintenance-> Configuration Manager to view the screen as shown next.
Configuration Manager Page