LevelOne GES-1650 - Manual (Page 31)

Web Smart Switch
31
3.3 Switching
Use the Switching pages to configure settings for the switch ports, trunk and other switch features.
3.3.1 Port Setting
This page allow user to configure switch port settings and show port current status.
Click Switching > Port Setting in the navigation panel to display the screen as shown below.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port Select Select the port(s) from the list box that you will change the port settings
for.
Name It allows you to give a description for the port.
Enabled Select Enable from the drop-down box to enable a port. The factory
default for all ports is enabled. A port must be enabled for data
transmission to occur. Select Disable to not use a port.
Speed Port speed capabilities:
 Auto: Auto speed with all capabilities.
 Auto-10M: Auto speed with 10M ability only.
 Auto-100M: Auto speed with 100M ability only.
 Auto-1000M: Auto speed with 1000M ability only.
 Auto-10/100M: Auto speed with 10/100M ability.
 10M: Force speed with 10M ability.
 100M: Force speed with 100M ability.
 1000M: Force speed with 1000M ability.
Selecting Auto (auto-negotiation) allows one port to negotiate with a peer
port automatically to obtain the connection speed and duplex mode that