LevelOne GES-1650 - Manual (Page 72)

Web Smart Switch
72
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port Select the number of the port for which you want to assign IEEE 802.1p
priority to incoming frames.
Priority Select the QoS port-based priority you want to assign to the packets
coming into the switch on the ports specified in the port field.
Apply Click Apply to save your changes to the switch.
Port This field displays the port number.
Priority This field indicates what IEEE 802.1p priority is assigned to the incoming
packets from the port.
3.6.2 802.1 p- based Priority
Click QoS > 802.1 p-based Priority in the navigation panel to display the screen as shown below.