LevelOne WBR-6603 - Manual (Page 9)

9
Hardware installation steps
Decide where to place your Wireless ADSL Router
You can place your Wireless ADSL Router on a desk or other flat surface. For optimal performance,
place your Wireless ADSL Router in the center of your office (or your home) in a location that is away
from any potential source of interference, such as a metal wall or microwave oven. This location must
be close to power and network connection.
Setup LAN connection
 Wired LAN connection: Connect an Ethernet cable from your computer’s Ethernet port to one of
the LAN ports of the Wireless Router.
 Wireless LAN connection: Locate the WBR-6603 at a proper position to gain the best transmit
performance.
3. Setup ADSL connection
Connect the supplied ADSL cable from to the ADSL port on the Wireless ADSL Router (the DSL
RJ11 connector) to the ADSL terminator provided by your phone company.
4. Power on
Connecting the power cord to power inlet and turning the power switch on, this product will
automatically enter the self-test phase. When it is in the self-test phase, the Status indicator will
be lighted ON, and the Status indicator will be continuously flashing once per second to indicate
that this product is in normal operation.