LevelOne WBR-6603 User Manual

Page 20

Text mode
Original mode

This option is primary to enable this product to work properly. The setting items and the web
appearance depend on the WAN type. You can choose a correct one from the following options:

A. Ethernet Over ATM (RFC 1483 Bridged) with NAT
B. IP over ATM (RFC 1483 Routed).
C. PPP over ATM (RFC 2364).
D. PPP over Ethernet (RFC 2516).

A. Ethernet Over ATM with Static IP Address

1. LAN IP Address: The local IP address of this device. The computer on your network must use the LAN IP

address of this device as their Default Gateway. You can change it if necessary.

2. WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS:

Enter the proper settings provided by your ISP.

3. IGMP : If you enable this option, the device would allow IGMP packet pass through.

4. Data Encapsulation: Vc-MUX and LLC, these two options depend on your ISP setting.

5. VPI and VCI, Schedule Type: These values depend on your ISP setting.