LevelOne WBR-6603 - Manual (Page 69)

69
Windows 2000 RADIUS server Authentication testing:
DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.)
1. Download and install the certificate on PC1. (Fig 4)
2. PC1 chooses the SSID of DUT as the Access Point.
3. Set authentication type of wireless client and RADIUS server both to EAP_TLS.
4. Disable the wireless connection and enable again.
5. The DUT will send the user's certificate to the RADIUS server, and then send the message of
authentication result to PC1. (Fig 5)
6. Windows XP will prompt that the authentication process is success or fail and end the
authentication procedure. ( Fig 6)
7. Terminate the test steps when PC1 get dynamic IP and PING remote host successfully.
Figure 4: Certificate information on PC1
Figure 5: Authenticating