LevelOne PLI-4510 - Manual (Page 8)

6
Chapter 2 – Installation & Uninstallation
Connection of Powerline Ethernet Adapter
2.1 Installing Powerline Device
1. If you have the SINGLE PACKAGE of Powerline,Connect the supplied RJ45 Ethernet cable from
your PC's Ethernet port to the Powerline Ethernet Adapter's LAN Ports or connect the supplied
RJ45 Ethernet cable from your xDSL/Cable Modem's Ethernet port to the Powerline Ethernet
Adapter's LAN Ports.
2. If you have the TWIN PACKAGE of Powerline, connect the supplied RJ45 Ethernet cable from
your PC's Ethernet port to the Powerline Ethernet Adapter's LAN Ports and connect the supplied
RJ45 Ethernet cable from your xDSL/Cable Modem's Ethernet port to the Powerline Ethernet
Adapter's LAN Ports.
3. Connect the Powerline Ethernet Adapter to your wall-mounted power outlet.
4. Check if the PLC LED of Powerline Ethernet Adapter is ON, the Powerline Ethernet Adapter is
connected and suitable for Internet Connections.
5. Check if the PLC LED is OFF, the Powerline Ethernet Adapter isn’t connected and suitable for
Internet Connections. Please follow next step to have it connected and suitable for Internet
Connections.
2.2 Installation of Powerline Utility
The Configuration Utility enables the users to identify HomePlug devices on the Powerline network;
measures data rate performance, ensures privacy and performs diagnostics by setting user defined
Ethernet Cable (RJ-45)
Powerline
Room 1 Room 2
ADSL / Cable Modem
PC Notebook
Internet