LevelOne PLI-4510 - Manual (Page 6)

4
Ethernet Link
Solid Green: 10/100 Mbps port linked
Off: Ethernet Link not active
Flashing Green: Data sending
Bottom Casing
The bottom casing contains an Ethernet Port.
Right Casing
The right casing contains a Security/Reset Button (dual function)
Security
This function is designed to generate an individual HomePlug AV network group under
multiple nodes environment. Please refer to the optional Individual HomePlug AV
Network Setup section below for more details.
Reset
This function is used to clear ALL data and restore ALL settings to the factory default values.
Note: The HomePlug AV 500Mbps nano Pass Thru must be plugged in to restore it to factory
defaults. Hold the Reset button for 13 sec then release.
Ethernet
Security / Reset