LevelOne WBR-3470 - Manual (Page 99)

4.3.8.5 Dialing plan
This router build-in a local dialing table. When this router does not register to the server user
still could make the call by dialing the number. This dialing table could dial to remote SIP
device, remote IAX device or local PSTN. It could store up to 100 records totally.
Prefix: Numbers defined in this field will be inserted at the beginning of the dialing pattern.
Maximum input length is 6 digits.
Min.: Minimum digits user can key in.
Max. : Maximum digits user can key in.
Del.: Number of digit defined in this field will be removed from the dialing pattern. For
example, if we dialed 81352109378 and the delete digit is 2, then the actual dialed number is
352109378. First 2 digits are removed. Maximum delete digit is 3 digits.
Add: Numbers in this field are added at the beginning of the dialing pattern. For example,
if 001 is in this field, the number dialed is 001+the rest of the numbers. The input length is
limited to 6 digits.
Remote IP: Remote side gateway IP addresses. When the prefix number is matched,
this call will go to the gateway with this IP address.
Protocol: Choose the dialing plan for SIP, IAX or PSTN
[Insert]: Insert a record where the current record is located (Current record is marked as
different color).
[Append]: Add a new record to the bottom of the list.
[Delete]: Delete a record.
Update]: Modify the value of the selected record in the Local Dialing Table
97