LevelOne FCS-5052 - Manual (Page 7)

3
DI/DO Cable
Pin No. Function
Pin 1 5V
Pin 2 DO
Pin 3 DI
Pin 4 GND
Hardware Reset
The Reset Button can be used to reboot the camera or restore it to factory default
settings. If the camera experiences a problem, rebooting the camera may correct the
problem. If the problem remains, please restore the camera to factory default settings
and reinstall the software.
To Reboot
Press and hold the Reset Button for one second. Wait for the camera to reboot.
To Restore
Press and hold the Reset Button for ten seconds.
NOTE - By restoring the camera, all settings will be restored to the factory
default settings.
Reset Button