LevelOne FCS-5052 - Manual (Page 59)

- 55 -
Reset to Default
This section is used to restore the camera to default factory settings. Check the boxes to
preserve the IP, Date and Time, or Language settings. Click Apply to restore the camera to
default factory settings.
Reboot
This feature will reboot the camera. Click Apply to begin. A message will pop up asking “The
device will reboot. Are you sure?” Click “OK” to continue. The camera will take about one
minute to reboot.
The following message will show during the rebooting process.
When completed, the live video page will be displayed in the web browser.