LevelOne FCS-5052 - Manual (Page 10)

6
Camera Connection
Basic Connection (Without PoE)
1. To attach external devices, such as sensors, alarms, speaker and microphone,
connect them to the extension I/O terminal block.
2. Connect the camera device to the Ethernet hub using a RJ45 Ethernet cable.
3. Connect the supplied power adapter to the camera and plug it into a power outlet.
Power over Ethernet (PoE) Connection
The camera is PoE compliant, so there are two options for connecting the camera to a
power and Ethernet source. The camera can either be connected to a PoE switch or a
non-PoE switch.
A. If using a PoE Switch
1. Use a single Ethernet cable to connect the camera to the PoE-enabled switch.