Fuse – LEESON PWM DC Control: 174299 User Manual
Page 13

8
Fuse
Wire a power input fuse between the stop switch (if installed) and the BAT+ terminal on the circuit
board. The fuse should be rated at 150% of input voltage and 150 - 200% of maximum motor name-
plate current. An example of a fuse we recommend would be Cooper Bussmann AMG-125, AMG-150,
AMG-175, or AMG-200.
"!44%29
!
!
!
!
-/4/2
"!4
&USE
"!4
%MERGENCY
3TOP
Figure . Motor and Battery Connections
This manual is related to the following products: