Asus A7V - Manual (Page 60)

ASUS A7V User’s Manual 60
4. BIOS SETUP
4. BIOS SETUP
Notes for JumperFree Mode
System Hangup
If your system crashes or hangs due to improper frequency settings, power
OFF your system and restart. The system will start up in safe mode running
at a DRAM-to-CPU frequency ratio of 3:3 and a bus speed of 100MHz. You
will then be led to BIOS setup to adjust the configurations.
NOTE: The function: “CPU Core: Bus Frequency Multiple” is available on
PCB version 1.02 and on.
JumperFree Mode
USB Legacy Support [Auto]
This motherboard supports Universal Serial Bus (USB) devices. The de-
fault of [Auto] allows the system to detect a USB device on startup. If de-
tected, the USB controller will be enabled. If not detected, the USB control-
ler will be disabled. When this field is set to [Disabled], the USB controller
is disabled no matter whether you are using a USB device or not. Configu-
ration options: [Disabled] [Enabled] [Auto]
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater than
64MB, you need to set this option to [Enabled]; otherwise, leave this on
[Disabled]. Configuration options: [Disabled] [Enabled]