Hardware setup, Asus a7v user’s manual 19 – Asus A7V User Manual
Page 19
ASUS A7V User’s Manual
19
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
3) Onboard Audio Setting (AUDIOCODEC)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using a PCI audio card on any
of the expansion slots or a primary AMR on the AMR slot. If using a PCI audio
expansion card, Onboard AC’97 Audio Controller in 4.4.2 I/O Device Con-
figuration of the BIOS must also be disabled.
NOTE:
This setting is available only on motherboards with the onboard audio option.
Setting
AUDIOCODEC
Enable
[1-2] [1-2] [1-2] [1-2] (default)
Disable
[2-3] [2-3] [2-3] [2-3]
A7V Audio Codec Setting
Enable
Onboard
Audio Codec
(Default)
Disable
Onboard
Audio Codec
AUD_EN2
AUD_EN1
1
SPK
ADN#
2 3
SPK
AUD_EN2
ADN#
AUD_EN1
2
0
1
0
1
01
A7V
4) PCI 3Volt Setting (3VSBSLT)
This jumper allows you to select the voltage supplied to PCI devices. If you
have PCI devices that require auxiliary power, set this jumper to 3 VSB.
Setting
3VSBSLT
3 Volt
[1-2]
3 VSB
[2-3] (default)
A7V PCI 3Volt Selection
Add 3 Volt
Add 3 VSB
(Default)
1 2
2 3
3VSBSLT
0
1
0
1
01
A7V