Asus A7V - Manual (Page 10)

10 ASUS A7V User’s Manual
2. FEATURES
Performance
2. FEA
TURES
2.1.2 Special Features
• ACPI Ready: Advanced Configuration and Power Interface (ACPI) provides
more Energy Saving Features for operating systems that support OS Direct Power
Management (OSPM) functionality. With these features implemented in the OS,
PCs can be ready around the clock, yet satisfy all the energy saving standards.
To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows
98 must be used.
• Easy Installation: Incorporates BIOS that supports autodetection of hard disk
drives, PS/2 mouse, and Plug and Play devices to make the setup of hard disk
drives, expansion cards, and other devices virtually automatic.
• Suspend and Go: Suspend-to-RAM (STR) provides maximum power savings
as an alternative to leaving the computer ON and QuickStart™ so that you do
not have to wait for a long time for system bootup.
• New Compliancy: Both the BIOS and hardware levels of this motherboard meet
the stringent requirements for PC 99 certification The new PC 99 requirements
for systems and components are based on the following high-level goals: Sup-
port for Plug and Play compatibility and power management for configuring
and managing all system components, and 32-bit device drivers and installation
procedures for Windows95/98/NT . Color-coded connectors and descriptive icons
make identification easy as required by PC 99.
• Symbios SCSI BIOS: Supports optional ASUS SCSI controller cards through
the onboard SYMBIOS firmware.
2.1.3 Optional Components
• Onboard AC’97 Audio Controller: Supports advanced automated audio per-
formance. (See 4.4.2: I/O Device Configuration in BIOS setup).
2.1.4 Performance Features
• Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas-
ter busses to the memory and processor.
• High-Speed Data Transfer Interface: This motherboard features the Promise®
Ultra DMA/100 Chip IDE controller chipset that supports UltraDMA/100 and data
transfer rates to 100MB/s. UltraDMA/100 is backward compatible with DMA/
66, DMA/33, and DMA and with existing DMA devices and systems so there is
no need to upgrade current EIDE/IDE drives and host systems. (UltraDMA/66
and UltraDMA/100 require a 40-pin 80-conductor cable to be enabled.)
• VCM/SDRAM Optimized Performance: This motherboard supports a new gen-
eration memory, NEC’s 64Mb Virtual Channel Memory (VCM) Synchronous Dy-
namic Random Access Memory (SDRAM), which is compatible with the industry